 |
 |
| SYS-5014C-M8 |
- SuperServer 5014C-M8 (Beige)
|
| SYS-5014C-M8B |
- SuperServer 5014C-M8B (Black)
|
| |
 |
| CPU |
- Single LGA775 (Prescott) ZIF Socket
- Supports an Intel® Pentium® 4 processor 6xx sequence on 90nm process ONLY (800MHz FSB) or
- Supports an Intel® Celeron® processor with 256KB L2 cache (533MHz FSB)
- Hyper-Threading (HT) enabled
|
| System Bus |
|
| |
 |
| Memory Capacity |
- Four 240-pin DIMM sockets
- Supports up to 4 GB DDR2 400 / 533MHz unbuffered ECC or Non-ECC memory
- Dual channel memory bus
- Memory must be populated in pairs
|
| Memory Type |
- DDR2 400 / 533MHz unbuffered ECC or Non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256MB, 512MB, 1GB
-
Unbuffered ECC / non-ECC DDR2
- Total 256MB to 4GB memory
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
 |
| Chipset |
- Intel E7221 (Copper River) chipset
- ICH6R + FWH + BCM5721
|
| SCSI |
- Adaptec AIC-7902 Controller
- Dual-Channel Ultra320 SCSI
- Host RAID 0, 1, 10, JBOD support
|
| RAID |
- Support for Zero-Channel RAID with AOC-LPZCR1 ZCR Card (Card NOT included)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0 (Optional) Card not included.
|
| Network Controllers |
- 2x Broadcom BCM5721 Gigabit Ethernet Controllers
- Supports 10/100/1000BASE-T/RJ45 output
|
| Graphics |
- Onboard integrated server quality graphics in MCH
|
| Super I/O |
|
| |
 |
| PCI-Express / PCI-X |
- 1x 64-bit PCI-X 100MHz slot (Riser card required)
|
| |
 |
| IDE |
- One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, and ATA/100
|
| LAN |
|
| USB |
- 2x USB 2.0 / 1.1 ports
- 4x USB 2.0 / 1.1 header for 4x ports
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1x Fast UART 16550 serial ports
- 1x serial header
|
| Parallel Port |
|
|
 |
 |
 |
| Form Factor |
|
| Model |
|
 |
 |
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
 |
 |
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
| Ports |
- 2x USB Ports (USB 2.0 Ready)
- 1x Serial COM Port
|
 |
 |
| Hot-swap |
- 4x 3.5" Hot-swap Ultra320/160 SCSI drive bays
|
 |
 |
| CD-ROM |
- TEAC Slim 24x CD-ROM drive
|
 |
 |
| Single Channel SCSI Backplane w/ SAF-TE |
 |
 |
| Fans |
|
 |
 |
Fixed 300W AC power supply module w/ PFC [ 24-pin, (4-pin=12V) ] |
| AC Voltage |
- 100 - 240V, 60-50Hz, 5 Amp
|
| DC Output |
|
| +5V |
|
| +5V standby |
|
| +12V1 |
|
| +12V2 |
|
| -12V |
|
| +3.3V |
|
| |
 |
| CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5, ±12V, +5V Standby
- CPU Core 4-Phase-switching voltage regulator w/ auto-sense from 0.8375V-1.6000V
|
| FAN |
- Total of five 3-pin fan headers
- 5x fans with tachometer monitoring
- Status monitor with firmware/software speed control
- Support 3-pin fans
|
| Temperature |
- Monitoring for CPU, chassis, environment
- CPU thermal trip support
- Thermal control for 5x fan connectors
- I2C temperature sensing logic
|
| LED |
- CPU / System Overheat LED
- +5V standby alert LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| |
 |
| BIOS Type |
- 8Mb Flash EEPROM with AwardBIOS®
|
| BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
|
|